Unimec 407 Ratio - 1/10 Screw Jack
Unimec
Ürün Kodu: 407 Ratio
Marka: Unimec
Teklif Al! info@fabrikaparca.com
Unimec 407 Ratio - 1/10 Screw Jack için Açıklama:
Materials
| Material | Normative | Specification | Indications | |
|---|---|---|---|---|
| Worm | 16NiCr4 | EN 10084:2008 | Casehardening alloy steel | Casehardened and ground on teeth and holds |
| Worn wheel | CuAl10Fe2-GM | EN 1982:2008 | Alluminium bronze | Chill molded |
| Threaded spindle | X5 CrNiMo 17-12-2 (AISI 316) | EN 10088-1:2014 | Stainless steel | Tr 40x7 (ISO 2901:2016) cutting |
| Carter | X5 CrNiMo 17-12-2 (AISI 316) | EN 10088-1:2014 | Stainless steel | Completely machined on 6 faces |
| Lubricant | Unimec Mark CA | Calcium based grease | 0,6 kg |
General features
| Operating temperature [°C] | -10 °C / 80 °C |
|---|---|
| Static load (traction or compression) | 80 kN |
| Dynamic load (traction or compression) | 50 kN |
| Maximum input speed | 1800 rpm |
| Main gearbox weight | 18 kg |
| Trapezoidal screw weight | 9 kg/m |
| Anti-rotation torque at maximum load | 165 Nm |
| Maximum admissible static lateral loads | 300 N |
| Center-to-center diameter | 70 mm |
| Maximum radial load on worm | 600 N |
| Standard working conditions | 25 °C - servizio 10% |
Specific features
| Nominal ratios | |||
|---|---|---|---|
| 1/5 | 1/10 | 1/30 | |
| Real ratio | 1/5 | 1/10 | 1/30 |
| Translation per worm revolution | 1,4 mm | 0,7 mm | 0,23 mm |
| Efficiency | 28 % | 25 % | 18 % |
| Start-up efficiency | 20 % | 18 % | 13 % |
| Maximum linear speed | 2520 | 1260 | 420 |
| Torque at maximum load | 40 Nm | 23 Nm | 11 Nm |
| Worm screw maximum torque | 490 Nm | 128 Nm | 154 Nm |
| Idle torque | 0,65 Nm | 0,45 Nm | 0,35 Nm |
Unimec 407 Ratio - 1/10 Screw Jack için önerilen ürünler: