Unimec TP 25022 - Tp 25022 Trapezoidal Screw Jack Render

Unimec

Ürün Kodu: TP 25022
Marka: Unimec

Teklif Al! info@fabrikaparca.com

Unimec TP 25022 - Tp 25022 Trapezoidal Screw Jack Render için Açıklama:

Materials

	Material	Normative	Specification	Indications
Worm	16NiCr4	EN 10084:2008	Casehardening alloy steel	Casehardened and ground on teeth and holds
Worn wheel	CuAl10Fe2-GZ	EN 1982:2008	Alluminium bronze	Centrifuged
Threaded spindle	C45	EN 10083-2:2006	Carbon steel	Tr 250x22 (ISO 2901:2016) - Rolled or machined
Carter	S235 J0	EN 10025-2:2005	Welded carbon steel	Completely machined on 6 faces
Lubricant	Unimec Mark CA		Calcium based grease	28 kg

General features

Operating temperature [°C]	-10 °C / 80 °C
Static load (traction or compression)	3000 kN
Dynamic load (traction or compression)	2000 kN
Maximum input speed	1800 rpm
Main gearbox weight	1200 kg
Trapezoidal screw weight	350 kg/m
Anti-rotation torque at maximum load	35800 Nm
Maximum admissible static lateral loads	50 kN
Center-to-center diameter	250 mm
Maximum radial load on worm	3,8 kN
Standard working conditions	25 °C - servizio 10%

Specific features

	Nominal ratios
	1/12	1/36
Real ratio	1/12	1/36
Translation per worm revolution	1,83 mm	0,61 mm
Efficiency	14 %	9 %
Start-up efficiency	8 %	5 %
Maximum linear speed	1100	1375
Torque at maximum load	3700 Nm	1570 Nm
Worm screw maximum torque	28500 Nm	28500 Nm
Idle torque	12 Nm	8 Nm

Euler's law (safety factor =2; dynamic compression load) Limit Load 1 (red) - 2 (blue) - 3 (green) C = Load [kN] L = Overall trapezoidal screw length [mm]

Power curves

The magenta zone indicates a potential heating risk. Working cycles must be carefully analized. VR = Worm rotational speed [rpm] VL = Spindle translation speed [mm/min] P = Requested input power [kW]