Honsberg FLEX-RRH-010...070 - Flow Transmitter / Switch

Sensor hall element
Nominal width DN 10 (FLEX-RRH-010)
DN 25 (FLEX-RRH-025)
Mechanical
Connection
female thread G 3
/8, G 1
male thread G 3
/8 A, G 1 A
hose nozzle Ø11, Ø30
(other threaded, crimped, and plug-in
connections, connections with constant flow
rate device or limiters available on request)
Metering ranges 0.1..100 l/min
for details, see table "Ranges"
Measurement
accuracy
±3 % of the measured value
Repeatability ±1 % of full scale value
Pressure loss max. 0.5 bar
Pressure
resistance
PN 100 bar
Medium
temperature
0..+70 °C
Storage
temperature
-20..+80 °C
Materials
medium-contact
Housing CW614N nickelled
or 1.4305
Rotor PVDF with magnets,
glued with epoxy
resin
Bearing Iglidur X
Axis ceramic Zr02-TZP
Seal FKM
Materials, nonmedium-contact
Clamps 1.4301
Electronic adapter CW614N nickelled
Electronics housing stainless steel
1.4305
Supply voltage 18..30 V DC
Power
consumption
< 1 W
Analog output 4..20 mA / max. load 500 Ω or
0..10 V / min. load 1 kΩ
Switching output transistor output "push-pull"
(resistant to short circuits and polarity
reversal)
Iout = 100 mA max.
Display yellow warning LED in plug outlet
Electrical
connection
for round plug connector M12x1, 4-pole
Ingress protection IP 67
Weight FLEX-RRH-010 approx. 0.8 kg
FLEX-RRH-025 approx. 2.1 kg
Conformity CE