Honsberg OMNI-XF - Flow Transmitter/Switch

Sensor dynamic diaphragm
Nominal width DN 8...25
Process
connection
female thread G
1
/4...G 1,
optionally male thread or hose nozzle,
NPT threads and custom specific connectors on request
Metering ranges 1...100 l/min (water)
for standard ranges, see table "Ranges",
minimum value range 0.4...6 l/min
optionally available
Accuracy Standard ranges:
±3 % of the measured value,
minimum 0.25 l/min
Minimum value range:
±3 % of the measured value,
minimum 0.1 l/min
Pressure loss max. 0.5 bar at the end of the metering range
Pressure
resistance
Plastic construction: PN 16
Full metal construction: PN 100
Media
temperature
Plastic construction: 0… +70 °C
Full metal construction: 0...+100 °C
Ambient temp. 0...+70 °C
Storage temp. -20...+80 °C
Materials
medium-contact
Body: PPS,
CW614N nickelled or
stainless steel 1.4404
Connections: POM,
CW614N nickelled or
stainless steel 1.4404
Seals: FKM
Diaphragm: stainless steel 1.4031k
Magnet holder: PPS
Back-up ring: PVDF
Adhesive: epoxy resin
Materials
non-mediumcontact
Housing: stainless steel 1.4305
Glass: mineral glass, hardened
Magnet: Samarium-Cobalt
Ring: POM
Flange bolts: stainless steel
Full metal construction:
steel
Supply voltage 18...30 V DC
Power
consumption
< 1 W
Signal output 4/0...20 mA / max. load 500 Ohm
(0/2...10 V available on request)
Switching output transistor output "push-pull"
(short circuit protected and polarity proof)
Iout = 100 mA max.
Hysteresis adjustable, position of the hysteresis
depends on minimum or maximum
Display backlit graphical LCD-Display
(transreflective), extended temperature
range -20...+70 °C, 32 x 16 pixels,
background illumination, displays value and
unit, flashing LED signal lamp with
simultaneous message on the display.
Electrical
connection
for round plug connector M12x1, 5-pole
Ingress protection IP 67 / (IP 68 if oil-filled)
Weight see table "Dimensions and weights"
Conformity CE