Honsberg LABO-F012-C - Flow Transmitter

Sensor calorimetric measurement principle
Process
connection
push-in sensor Ø12 mm
Metering range water 2..150 cm/s
or 3..300 cm/s
oil or gases available on request
Measurement
accuracy
depending on the installation location and
flow conditions
typically ±10 % of full scale value or 2 cm/s,
of full scale value measured in the T-piece
±5 %
Repeatability ±1 %
Pressure
resistance
stainless steel compression
fitting
PN 40 bar
plastic cone with union nut PN 10 bar
Medium
temperature
-20..+70 °C
-20..+100 °C ( extended temperature range)
Ambient
temperature
0..+60 °C
Temperature
dependency
±0.01 % / K
Supply voltage 24 V DC ±10 % (controlled)
Power
consumption
< 2 W
Analog output 4..20 mA / load max. 500 Ohm or
0..10 V / min. load 1 kOhm
Frequency output selectable, max. 2 kHz.
Pulse output selectable pulse per volume, details of
Nominal pipework width required, pulse
width 50 ms
LED yellow LED (On = Normal / Off = Alarm /
rapid flashing = Programming)
Electrical
connection
for round plug connector M12x1, 4-pole
Ingress protection IP 67
Materials
medium-contact
Housing 1.4571
Materials nonmedium-contact
Plug PA6.6 gold-plated contacts
Weight approx. 0.05 kg (excluding screwed
connection)
Conformity CE