Unimec TPR 8010 Render - Trapezoidal Screw Jacks Model Tpr 8010 Render

Unimec

Ürün Kodu: TPR 8010 Render
Marka: Unimec

Teklif Al! info@fabrikaparca.com

Unimec TPR 8010 Render - Trapezoidal Screw Jacks Model Tpr 8010 Render için Açıklama:

Materials

	Material	Normative	Specification	Indications
Worm	16NiCr4	EN 10084:2008	Casehardening alloy steel	Casehardened and ground on teeth and holds
Worn wheel	CuAl10Fe2-GM	EN 1982:2008	Alluminium bronze	Chill molded
Nut	CuAl10Fe2-GM	EN 1982:2008	Alluminium bronze	Chill molded
Threaded spindle	C45	EN 10083-2:2006	Carbon steel	Tr 80x10 (ISO 2901:2016) - Rolled or machined
Carter	GJL 250	EN 1561:2011	Grey cast iron	Completely machined on 6 faces
Lubricant	Unimec Mark CA		Calcium based grease	2 kg

General features

Static load (traction or compression)	350 kN
Dynamic load (traction or compression)	250 kN
Maximum input speed	1800 rpm
Main gearbox weight	62 kg
Trapezoidal screw weight	37 kg/m
Anti-rotation torque at maximum load	1530 Nm
Maximum admissible static lateral loads	4 kN
Center-to-center diameter	90 mm
Maximum radial load on worm	900 N
Standard working conditions	25 °C - servizio 10%

Specific features

	Nominal ratios
	1/5	1/10	1/30
Real ratio	1/5,2	1/9,67	1/30
Translation per worm revolution	1,92 mm	1,03 mm	0,33 mm
Efficiency	22 %	20 %	14 %
Start-up efficiency	14 %	13 %	9 %
Maximum linear speed	2000	1500	600
Torque at maximum load	360 Nm	200 Nm	95 Nm
Worm screw maximum torque	850 Nm	850 Nm	490 Nm
Idle torque	3,5 Nm	2,7 Nm	1,95 Nm

Euler's law (safety factor =2; dynamic compression load) Limit Load 1 (red) - 2 (blue) - 3 (green) C = Load [kN] L = Overall trapezoidal screw length [mm]

Power curves

The magenta zone indicates a potential heating risk. Working cycles must be carefully analized. VR = Worm rotational speed [rpm] VL = Spindle translation speed [mm/min] P = Requested input power [kW]