| Marka | Unimec |
|---|---|
| Ürün | Unimec TB-00204 Reducer |
| Ürün Kodu | TB-00204 |
| Artikel | - |
| Ülke | United States (US) |
| Durumu | Yeni / Kullanılmamış |
| Döküman Datasheet |
General Catalog.pdf
|
| Material | Norm | Characteristic | Indications | |
|---|---|---|---|---|
| Endless lives | 16NiCr4 | EN 10084: 2008 | Alloy case-hardening steel | Cemented and ground on teeth and shanks |
| Worm wheel | CuAl10Fe2-GM | EN 1982: 2008 | Aluminum bronze | Shell cast |
| Threaded rod | C45 | EN 10083-2: 2006 | Carbon steel | Tr 20x4 (ISO 2901: 2016) - Rolled or cut |
| Carter | GJL 250 | EN 1561: 2011 | Gray cast iron | Entirely worked on 6 sides |
| Lubricant | Unimec Mark CA | Calcium-based grease | 0.1 kg |
| Operating temperature | -10 ° C / 80 ° C |
|---|---|
| Static load (traction or compression) | 15 kN |
| Dynamic load (traction or compression) | 10 kN |
| Maximum input speed | 1800 rpm |
| Body weight | 6 kg |
| Threaded rod weight | 2.2 kg / m |
| Anti-rotation torque at maximum load | 17 Nm |
| Static side loads admissible | 0 N |
| Wheelbase | 30 mm |
| Maximum radial load on the worm | 220 N |
| Standard working conditions | 25 ° C - service 10% |
| Nominal ratios | |||
|---|---|---|---|
| 1/5 | 1/10 | 1/30 | |
| Real relationship | 1 / 4.75 | 1 / 10.5 | 1/30 |
| Feed per worm revolution | 0.842 mm | 0.38 mm | 0.13 mm |
| Yield | 31% | 28% | 20% |
| Return on first posting | 22% | 19% | 14% |
| Maximum linear speed | 1440 | 720 | 240 |
| Drive torque at maximum load | 4.2 Nm | 2.3 Nm | 1.1 Nm |
| Maximum torque on the worm | 54 Nm | 54 Nm | 42 Nm |
| Idle torque | 0.25 Nm | 0.2 Nm | 0.15 Nm |
İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.
Türkiye' nin Her Yerinden44448 19Pazartesi - Cuma
08:00 - 18:00
Hafta sonu kapalı.
Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.
+90 506 875 44 15