Marka	Pavone
Ürün	TESTER/CALIBRATOR 1008
Ürün Kodu	-
Artikel	PSDA2010
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış
Döküman Datasheet	pavone-psda2010-psda2010-tester-calibrator-1008-126093.pdf

Teknik Bilgi

The Tester 1008, unique in its kind, is useful for checking the distribution of the load among the individual cells, avoiding overloads or imbalances that are harmful both for the load cells and for the precision of the measurement. Our Tester 1008 diagnostic calibrator allows you to check the exact calibration of the four-cell systems in a few minutes, with a simple and practical connection to the junction box. This system will help you to save time. The Tester 1008 also allows the instrumental calibration of the weight indicators / transmitters. The Tester 1008 has a monochromatic touch screen display, a touch keyboard, a power button and a palm ABS case. Tester 1008 can be used with cells with power supply voltage from 3 Vdc to 15 Vdc, both positive and positive and negative with input impedance> 100 k Ohm.

Technical Specifications

Internal Resolution: 24 bit

Degree of protection: IP65

Visible resolution (in divisions): > 50000

Temperature range: -10°C ÷ +50°C

Storage temperature: -20 ÷ +70°C

Serial port: USB (PC connection), RS232 (instrument connection), NFC (instrument connection)

Power supply: 3.3 Vdc / 50 mA (max 4 cells 350 Ohm)

Microcontroller: ARM Cortex M0 + 32-bit, 256KB Flash reprogrammable on-board from USB

Data storage: 64 Kbytes expandable up to 1024 Kbytes

Regulatory compliance: EN61000-6-2, EN61000-6-3 EMC; EN61010-1 for Electrical Safety

Dimensions: 185 x 93 x 36 mm (H x L x P)

Resolution: 16 bit

Battery: Four 1.5V alkaline batteries or rechargeable NiMh 1.2V

Impedance: 350 ÷ 2000 Ohm (load cells)

Power consumption: Max. 200 mA

Optional memory: USD card (not removable)

Status battery: Battery icon with 5 charge levels

Output linearity: <0,02 % full scale

Output signal: -3 mV ÷ +30 mV

Input signal range: -3.9 ÷ 3.9mV/V