Marka	Pavone
Ürün	DAT 200 ETHERNET IP
Ürün Kodu	-
Artikel	PSDA0906
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış
Döküman Datasheet	pavone-psda0906-psda0906-dat-200-ethernet-ip-726952.pdf

Teknik Bilgi

The weight transmitter DAT 200 Ethernet IP has high performance and long-term reliability. The configuration and calibration can be set up directly from the front panel. The small width dimensions allow to place a large number of transmitters inside the electrical automation panels. The weight transmitter DAT 200 Ethernet IP has an interface with intrinsically safe barriers for use in hazardous areas. The weight transmitter DAT 200 Ethernet IP can be customized according to customer needs.

Technical Specifictions

Measuring range: -4 ÷ +4 mV/V

Input sensitivity: 0.02 µV/count

Full scale non-Linearity: < 0.01%

Gain drift: < 0.001% FS/°C

Display: 5 digit, red LED (7 segments), h 7 mm

A/D Converter: 24 bit

Internal Resolution: 16.000.000 counts

Trasducer input voltage: 4 V (max 4 cells 350 Ohm)

Visible resolution (in divisions): 999999

Divisions value (adjustable): 0.001÷50 adjustable

Temperature range: -10 ÷ +50°C (max umidity 85% without condensation)

Storage temperature: -20 ÷ +60°C

Filter: 0.02 ÷ 25 Hz

Serial port: RS232C half duplex with ASCII protocol

Power supply: 24 Vcc ±10% – power 2 W

Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for electrical security

Fieldbus: Ethernet IP

Baud rate: 2400 ÷ 115200 adjustable

Transmission distance: 15 m