Pavone Psda0905 Dat 200 Ethernet Weight Transmitter

Pavone

Marka Pavone
Ürün DAT 200 ETHERNET
Ürün Kodu -
Artikel PSDA0905
Ülke United States (US)
Durumu Yeni / Kullanılmamış
Döküman
Datasheet
  pavone-psda0905-psda0905-dat-200-ethernet-888014.pdf

Teknik Bilgi


The weight transmitter DAT 200 Ethernet has high performance and long-term reliability. The configuration and calibration can be set up directly from the front panel. The small width dimensions allow to place a large number of transmitters inside the electrical automation panels. The weight transmitter DAT 200 Ethernet has an interface with intrinsically safe barriers for use in hazardous areas. The weight transmitter DAT 200 Ethernet can be customized according to customer needs. It has two red status LEDs, 3 mechanical buttons behind the red door and screw terminal blocks.

Technical Specifications

Measuring range: –4 ÷ +4 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: <0.01%
Gain drift: < 0.001% FS/°C
Display: 5 digit, red LED (7 segments), h 7 mm
A/D Converter: 24 bit
Internal Resolution: 16.000.000 points
Trasducer input voltage: 4 V (max 4 cells 350 Ohm)
Visible resolution (in divisions): 99999
Divisions value (adjustable): 0.001 ÷ 50
Temperature range: -10 ÷ +50°C (max umidity 85% without condensation)
Storage temperature: -20 ÷ +60 °C
Filter: 0.02 ÷ 25 Hz
Serial port: RS232C half duplex with ASCII protocol
Power supply: 24 Vcc ±10% – power 2 W
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for electrical security
Fieldbus: Ethernet 10/100 with protocols TCP, Modbus/TCP, IP
Baud rate: 2400 ÷ 115200 adjustable
Transmission distance: 15 m
Buffer dimensions: 128 byte IN - 128 byte OUT

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.