Marka	Nortek
Ürün	Nortek End Of Line Switch Series 2210800
Ürün Kodu	Series 2210800
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış
Döküman Datasheet	2210800-HT End of line switch.pdf

Teknik Bilgi

Nortek End of Line Switch Series 2210800

Applications Pressure control in dual-line grease or air/oil systems and switch over to the other line. Features Pressure control via over-pressure inverter. Fixed setting pressure control. The switching mechanism is built in a robust steel housing Description The end-of-line controls are very important devices in a dual-line grease or air/oil system because they are the only component capable of detecting the correct operation of the pump and/or the circuit tubing and piping. The end-of-line switch is directly linked to the proper operation of the lubrication cycle in a dual-line system. Principle of operation and design In the lubrication cycle the following operating sequence is produced, the pump by means of the electrovalve that controls the lubrication sends lubricant through line 1 and therefore by the end-ofline control, at the moment when the pressure in the piston (A) moves the rod (B) is displayed in the turret, when line 1 is decompressed and line 2 is pressurized, the process is reversed, the rod is hidden. This model comes with a pressure gauge and a pressure switch to regulate the pressure. The final line control allows to send an alarm signal or to lock the machine when the pressure reaches the preset value. Installation For proper operation of a dual-line grease or air/oil system, the end-of-line pressure swtich needs to be installed at the end of line, before the last grease or air/oil block. This insures that there is always grease or oil passing through the end-of-line switch.