Honsberg Flow Transmitter/Switch

OMNI-XF

Honsberg

Marka Honsberg
Ürün Flow Transmitter/Switch
Ürün Kodu OMNI-XF
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


Sensor dynamic diaphragm Nominal width DN 8...25 Process connection female thread G 1 /4...G 1, optionally male thread or hose nozzle, NPT threads and custom specific connectors on request Metering ranges 1...100 l/min (water) for standard ranges, see table "Ranges", minimum value range 0.4...6 l/min optionally available Accuracy Standard ranges: ±3 % of the measured value, minimum 0.25 l/min Minimum value range: ±3 % of the measured value, minimum 0.1 l/min Pressure loss max. 0.5 bar at the end of the metering range Pressure resistance Plastic construction: PN 16 Full metal construction: PN 100 Media temperature Plastic construction: 0… +70 °C Full metal construction: 0...+100 °C Ambient temp. 0...+70 °C Storage temp. -20...+80 °C Materials medium-contact Body: PPS, CW614N nickelled or stainless steel 1.4404 Connections: POM, CW614N nickelled or stainless steel 1.4404 Seals: FKM Diaphragm: stainless steel 1.4031k Magnet holder: PPS Back-up ring: PVDF Adhesive: epoxy resin Materials non-mediumcontact Housing: stainless steel 1.4305 Glass: mineral glass, hardened Magnet: Samarium-Cobalt Ring: POM Flange bolts: stainless steel Full metal construction: steel Supply voltage 18...30 V DC Power consumption < 1 W Signal output 4/0...20 mA / max. load 500 Ohm (0/2...10 V available on request) Switching output transistor output "push-pull" (short circuit protected and polarity proof) Iout = 100 mA max. Hysteresis adjustable, position of the hysteresis depends on minimum or maximum Display backlit graphical LCD-Display (transreflective), extended temperature range -20...+70 °C, 32 x 16 pixels, background illumination, displays value and unit, flashing LED signal lamp with simultaneous message on the display. Electrical connection for round plug connector M12x1, 5-pole Ingress protection IP 67 / (IP 68 if oil-filled) Weight see table "Dimensions and weights" Conformity CE 

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.