Honsberg OMNI-F - Flow Transmitter / Switch

Sensor calorimetric measurement principle
Process
connection
screw-in thread G 1
/4 A..G 1
/2 A,
push-in sensor Ø12 mm
Metering range water 2..150 cm/s range,
3..300 cm/s available on request
oil (available on request)
Measurement
accuracy
dependent on the installation location and
flow conditions
typically ±10 % of full scale value or 2 cm/s,
of full scale value measured in the T-piece
±5 %
Repeatability ±1 %
Dynamics in water (25 °C) at average
flow speed of approx. 1-2 s
Hysteresis adjustable, position of hysteresis
depends on min. or max. switching value
Pressure
resistance
PN 100 bar (PN 200 bar available on
request)
Medium
temperature
0..+70 °C
Ambient
temperature
-20..+70 °C
Storage
temperature
-20..+80 °C
Materials
medium-contact
stainless steel 1.4571
Materials
non-mediumcontact
Housing Stainless steel 1.4305
Glass Mineral glass, hardened
Magnet Samarium-Cobalt
Ring POM
Supply voltage 24 V DC ±10 %
Analog output 0/4..20 mA or 0/2..10 V
Power
consumption
< 1 W
Switching outputs
S1 and S2
transistor output "push-pull"
(resistant to short circuits and polarity
reversal) lout = 100 mA max. per output
Display backlit graphical LCD-Display
(transreflective), extended temperature
range -20..+70 °C, 32 x 16 pixels,
background illumination, displays value and
unit, flashing LED signal lamp with
simultaneous message on the display.
Electrical
connection
for round plug connector M12x1, 5-pole
Ingress protection IP 67
Weight approx. 0.25 kg
Conformity CE