Marka	Honsberg
Ürün	Flow Transmitter/Switch
Ürün Kodu	LABO-HD1K-S
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor analog Hall sensors Nominal width DN 8..25 Process connection female thread G 1 /4..G 1 Metering range 0.1..80 l/min for details see see table "Ranges" Pressure loss 0.4..1.6 bar at Qmax. Qmax. to 100 l/min Tolerance ±3 % of full scale value Pressure resistance PN 200 bar, optionally PN 500 bar Media temperature -20..+85 °C optionally -20..+120 °C Ambient temperature -20..+70 °C Media water, oils (gases and aggressive media available on request) Wiring see section "Wiring" Supply voltage 18..30 V DC Power consumption < 1 W Outputs transistor output "push-pull" (resistant to short circuits, and reversal polarity protected) lout = 100 mA max. Display yellow LED (On = Normal / Off = Alarm / rapid flashing = Programming) Ingress protection IP 67 Electrical connection for round plug connector M12x1, 4-pole Materials medium-contact Brass construction: CW614N nickelled, CW614N, 1.4310, hard ferrite, NBR Stainless steel construction: 1.4571, 1.4404, 1.4310, hard ferrite PTFE-coated, FKM Non-mediumcontact materials CW614N nickelled Weight see table "Dimensions and weights" Conformity CE Installation location Standard: horizontal inwards flow; other installation positions are possible; the installation position affects the metering and switching range.