Honsberg Flow Transmitter

LABO-RRH-C

Honsberg

Marka Honsberg
Ürün Flow Transmitter
Ürün Kodu LABO-RRH-C
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


Sensor hall element Nominal width DN 10 (LABO-RRH-010) DN 25 (LABO-RRH-025) Mechanical connection female thread G 3 /8, G 1 male thread G 3 /8 A, G 1 A hose nozzle Ø11, Ø30 (other threaded, crimped, and plug-in connections, connections with constant flow rate device or limiters available on request) Metering ranges 0.1..100 l/min for details, see table "Ranges" Measurement accuracy ±3 % of the measured value Repeatability ±1 % of full scale value Pressure loss max. 0.5 bar Pressure resistance PN 100 bar Medium temperature 0..60 °C, optionally 0..100 °C Storage temperature -20..+80 °C Materials medium-contact Housing CW614N nickelled or 1.4305 Rotor PVDF with magnets, glued with epoxy resin Bearing Iglidur X Axis Ceramic Zr02-TZP Seal FKM Materials, nonmedium-contact Clamps 1.4301 Electronic housing CW614N nickelled Supply voltage 10..30 V DC at voltage output 10 V: 15..30 V DC Power consumption < 1 W (for no-load outputs) Output data: all outputs are resistant to short circuits and reversal polarity protected Current output: 4..20 mA (0..20 mA available on request) Voltage output: 0..10 V (2..10 V available on request) Output current max. 20 mA Frequency output: transistor output "push-pull" lout = 100 mA max. output frequency dependent on metering range, standard 500 Imp/l (corresponds to 666.7 Hz at 80 l/min) range for small values: 5000 Imp/l (corresponds to 500 Hz at 6 l/min) (other frequencies available on request) Pulse output: transistor output "push-pull" lout = 100 mA max. pulse width 50 ms pulse per volume is to be stated Display yellow LCD shows operating voltage (LABO-RRH-I / U) or output status (LABO-RRH-F / C) (rapid flashing = programming) Electrical connection for round plug connector M12x1, 4-pole Ingress protection IP 67 Weight LABO-RRH-010 approx. 0.6 kg LABO-RRH-025 approx. 1.9 kg Conformity CE

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.