Honsberg LABO-F012-S200 - Flow Switch

Sensor calorimetric measurement principle
Process
connection
push-in sensor Ø12 mm
Switching range water 2..150 cm/s
or 3..300 cm/s
oil or gases available on request
Measurement
accuracy
dependent on the installation location and
flow conditions
typically ±10 % of full scale value or 2 cm/s,
of full scale value measured in the T-piece
±5 %
Repeatability ±1 %
Start-up time 10 sec. after application of the operating
voltage
Response time 1..3 s
Pressure
resistance
Stainless steel compression
fitting
PN 40 bar
Plastic cone with union nut PN 10 bar
Medium
temperature
-20..+ 70 °C
-20..+100 °C (extended temperature range)
Ambient
temperature
0..+60 °C
Temperature
dependency
± 0.01 % / 1 K
Temperature
gradient
4 K/s
Materials
medium-contact
Housing 1.4571
Materials nonmedium-contact
Plug PA6.6 gold-plated contacts
Supply voltage 24 V DC ±10 % (controlled)
Power
consumption
< 2 W
LED yellow LED
(On = Normal / Off = Alarm /
rapid flashing = Programming)
Electrical
connection
for round plug connector M12x1, 4-pole
Ingress protection IP 67
Weight approx. 0.05 kg
(excluding screwed connection)
Conformity CE