Marka	Honsberg
Ürün	Flow Meter / Switch / Indicator
Ürün Kodu	HR1MV-0040G.E
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor analog hall sensor Nominal width DN 32..50 Process connection female thread G 11 /4..G 2 (further process connections available on request) Metering range 2..220 l/min for details see Qmax. to 250 l/min table "Ranges" Tolerance ±3 % of the full scale value plus viscosity variation Pressure resistance PN 200 bar Media temperature -20..+85 °C optionally -20..+150 °C Ambient temperature -20..+70 °C Media water, oils (gases and aggressive media available on request) Wiring see section "Wiring" Supply voltage 18..30 V DC Power consumption < 1 W Analog output 0/4..20 mA, 0/2..10 V via a 500 OhmW resistance after 0 V. Switching values S1+S2 PNP or NPN, selectable, 300 mA max. load in total, programmable as min. value or max. value, resistant to short circuits, reversal polarity protected. Display backlit graphical LCD-Display (transreflective), extended temperature range -20..+70 °C, 32 x 16 pixels, background illumination, displays value and unit, flashing LED signal lamp with simultaneous message on the display. Ingress protection IP 67 Electrical connection for round plug connector M12x1, 5-pole Materials medium-contact Brass construction: CW614N nickelled, CW614N, 1.4310, hard ferrite DN 32..40: NBR Stainless steel construction: 1.4571, 1.4404, 1.4310, hard ferrite PTFE-coated, DN 32..40: FKM Materials, nonmedium-contact CW614N, PPS, glass Weight see table "Dimensions and weights" Installation location Standard: horizontal inwards flow; other installation positions are possible; the installation position affects the display, metering and switching range.