Marka	Honsberg
Ürün	Flow Meter / Switch / Indicator
Ürün Kodu	HD1K-020GM
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Sensor Analog Hall sensor Nominal width DN 8..25 Process connection Female thread G ¼..G 1 (further process connections available on request) Metering range 0.1..80 l/min For details see table "Ranges" Pressure loss 0.4..1.6 bar at Qmax. Qmax. to 100 l/min Tolerance ±3 % of full scale value Pressure resistance PN 200 optionally PN 500 bar Medium temperature -20..+85 °C optionally -20..+150 °C Ambient temperature -20..+70 °C Media Water, oils (Gases and aggressive media available on request) Wiring see section "Wiring" Power supply 18..30 V DC Power requirement < 1 W Analogue output 0/4..20 mA, 0/2..10 V via a 500 W resistance after 0 V. Switching values S1 + S2 PNP or NPN, selectable, 300 mA max. load in total, programmable as min. value or max. value, resistant to short circuits, reversed polarity protected. Display graphical LCD display, extended temperature range -20..+70 °C, 32 x 16 pixels, Backlite, displays value and unit, flashing LED signal lamp with simultaneous message on the display. Ingress protection IP 67 Electrical connection For round plug connector M12x1, 5-pole Materials medium-contact Brass construction: CW614N nickelled, CW614N, 1.4310, hard ferrite, NBR Stainless steel construction: 1.4571, 1.4404, 1.4310, hard ferrite PTFE-coated, FKM Materials, nonmedium-contact CW614N, PPS, glass Weight see table "Dimensions and weights" Installation location Standard: horizontal inwards flow; other installation positions are possible; the installation position affects the display, metering and switching range.