Greisinger GHTU-1KMP - Humidity Temperature Transmitter

Humidity-temperature transmitter, sensor tube on the side, for wall mounting

GENERAL:

Thanks to the latest digital microprocessor technology, the air humidity/temperature measuring transducer offers even greater possibilities for compensating for the special sensor characteristics. In terms of accuracy, temperature stability and range of functions, new standards are achieved. Due to different versions (e.g. for wall or duct mounting, with a separate sensor tube or with a radiation hat) and a permissible operating temperature for the electronics of -25 °C ... +50 °C (sensor: -40 ...+120 °C ) the GHTU ... MP can be used for almost all applications, 2 normal signal outputs.

TECHNICAL SPECIFICATIONS:

Measuring ranges:
Relative humidity:
0.0 ... 100.0% r. H. (temperature-compensated)
Temperature:
-40.0 ... +120.0 °C or -40.0 ... +248 °F
Recommended humidity measuring range:
20.0 ... 80.0 % r. H. (standard)
5.0 ... 95.0 % r. F. (with the high humidity option)
Display options:
With the UNI option, an alternative
"Options" display area can be displayed and output instead of the humidity value. The display size is selected using the buttons.
Wet bulb temperature:
-27.0 ... +60.0 °C
Dew point temperature:
-40.0 ... +60.0 °C
Enthalpy:
-25.0 ... +999.9 kJ/kg
Moisture content of the air:
0.0 ... 640.0 g/kg
Absolute humidity:
0.0 ... 200.0 g/m³
Accuracy: (at 25 °C and in the recommended humidity measuring range)
Display:
Air humidity:
±2.5% RH
Temperature:
±0.4% of the measured value ±0.2 °C
Output signals:
Humidity ±0.2% FS, temperature ±0.2% FS
Housing:
ABS (IP65)
Sensor tube:
Tube 14 mm Ø, with protective cap that can be unscrewed
Electrical connection:
Angular plug according to EN 175301-803/A (IP65)
Fastening :
4 housing bores for wall mounting or via plastic tube holder for duct mounting
Functions:
Min/Max value memory, zero point/slope adjustable, output signal scalable
Scope of delivery: device, operating instructions