Greisinger GCO 100 - Co Handheld Meter With Alarm

HIGHLIGHTS:

• 3 display units selectable (ppm, mg / m³ and % CO Hb)
• Warning if the maximum workplace concentration (MAK / AGW) is exceeded
• Including interface
• Including test report

GENERAL:

Carbon monoxide (CO) is formed when carbon is burned. Depending on the effectiveness of the combustion (oxygen supply) and the combustion temperature, more or less CO gas is produced. The gas is flammable and highly toxic. It is invisible, tasteless and odorless.
Even the smallest concentrations are dangerous for humans!
Therefore, there are guidelines in Germany for the maximum workplace concentration (MAK / AGW) of CO gas: 30 ppm

APPLICATIONS:

• Air quality monitoring (e.g. at work)
• Control of heating systems, gas boilers, fireplaces
• Air monitoring during maintenance work (tunnels, exhaust gas routes, ...)
• Detection of CO in smokers' breath (% CO Hb)
• Detection of CO poisoning, e.g. in fire victims (fire brigades, etc.)

TECHNICAL SPECIFICATIONS:

Measuring principle:
electrochemical CO measuring cell
Measuring range:
0 ... 1000 ppm CO concentration
Display ranges:
0 ... 1000 ppm CO concentration
0 ... 1250 mg/m³ CO concentration
0 ... 60.0 % CO Hb (estimate via the breathing air)
Resolution:
1 ppm, 1 mg/m³ or 0.1% CO Hb
Sensor element:
integrated in the device, sensor opening on the face side with internal thread for screwing on accessories Service
life:
>5 years if used properly in air; Recommended check: every 6 months (depending on the accuracy requirements)
Accuracy (in the range 0 ... 500 ppm)
Linearity:
< ±5% of the measured value ±1 digit
Repeatability:
< ±5% of the measured value ±1 digit
Scope of delivery:
device, battery, test report, operating instructions