Marka	Gefran
Ürün	Melt High Temperature
Ürün Kodu	WN-B35D
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Accuracy (1) Resolution Measurement range Maximum overpressure (without degrading performances) Measurement principle Power supply Maximum current absorption Insulation resistance (at 50Vdc) Output signal Full Scale (FSO) Zero balance (tollerance ± 0.25% FSO) Zero signals adjustment (tollerance ± 0.25% FSO) Span adjustment within ± 5% FSO Maximum allowed load Response time (10...90% FSO) Output noise (RMS 10-400Hz) Calibration signal Output short circuit ingress and reverse polarity protection Compensed temperature range Operating temperature range Storage temperature range Thermal drift in compesated range: Zero / Calibration / Sensibility Diaphragm maximum temperature Zero drift due to change in process temperature (zero) Zero drift temperature for Autocompensated version (SP) within the temperature range 20°C-315°C inclusive the drift temperature of the housing Standard Material in contact with process medium Thermocouple (model WN2) Protection degree (with 6-pole female connector)  H <±0.25%FSO (100...1000 bar)  M <±0.5%FSO (35...1000 bar)  Infinite  0..35 to 0..1000bar 0..500 to 0..15000psi 2 x FS 1.5 x FS above 500bar/7500psi Extensimetric 15...30Vdc N, C 10...30Vdc B, M -15....+15Vdc H, L 25mA >1000 MOhm 5Vdc (M, H) - 10Vdc (N, L) 5,1Vdc (B) - 10,1Vdc (C) 0Vdc (M, N, H, L) 0.1Vdc (B, C) “Autozero” function See Manual 1mA ~ 1ms < 0.025% FSO 80% FSO YES 0...+85°C -30...+105°C  -40...+125°C < 0.02% FSO/°C  315°C/600°F < 0.04 bar/°C < 0.005 bar/°C 100 ≤ p < 500 bar 0.0022 %FS/°C p ≥ 500 bar Diaphragm: • 17-7PH corrugated  diaphragm with GTP+ Stem • 17-4 PH STD: type “J” (isolated junction) IP65