Gefran Melt High Temperature

W7 SIL2-P01M

Gefran

Marka Gefran
Ürün Melt High Temperature
Ürün Kodu W7 SIL2-P01M
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


Accuracy (1) H <±0.25%FS (100...1000 bar) M <±0.5%FS (17...1000 bar) Resolution Infinite Measurement range 0..17 to 0..1000bar 0..250 to 0..15000psi Maximum overpressure (without degrading performances) 2 x FS 1.5 x FS above 1000bar/15000psi Measurement principle Extensimetric thick film Power supply 10...30Vdc (B) 15...30Vdc (C,7) Maximum current absorption 25mA Insulation resistance (at 50Vdc) >1000 MOhm Output signal Full Scale FS 10.5Vdc (7) - 5.1Vdc (B) 10.1Vdc (C) Zero balance (tolerance ± 0.25% FS) 0.5Vdc (7) - 0.1Vdc (B,C) Zero signals adjustment (tolerance ± 0.25% FS) “Autozero” function Span adjustment within ± 5% FS See Manual Maximum allowed load 1mA Electronic response time (10...90% FS) ~ 1ms Output noise (RMS 10-400Hz) < 0.025% FS Calibration signal 80% FS Output short circuit and reverse polarity protection YES Compensated temperature range 0...+85°C Operating temperature range -30...+105°C Storage temperature range -40...+125°C Thermal drift in compesated range: Zero / Calibration / Sensibility < 0.02% FS/°C Diaphragm maximum temperature 315°C/600°F Zero drift due to change in process temperature (zero) < 0.04 bar/°C Zero drift temperature for Autocompensated version (SP) within the temperature range 20°C-315°C inclusive the drift temperature of the housing < 0.005 bar/°C 100 ≤ p < 500 bar 0.0022 %FS/°C p ≥ 500 bar Standard material in contact with process medium Diaphragm: • 17-7PH corrugated diaphragm  with GTP+ Stem: • 17-4 PH Thermocouple (model W72) STD: type “J” (isolated junction) Protection degree (with 6-pole female connector CON300) IP66 SIL2 certification IEC/EN 62061  IEC 61508

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.