Marka	Gefran
Ürün	Melt High Temperature
Ürün Kodu	MX-B35U
Artikel	-
Ülke	United States (US)
Durumu	Yeni / Kullanılmamış

Teknik Bilgi

Accuracy (1) H <±0,25%FS (100...2000 bar) M <±0,5%FS (35...2000 bar) Resolution Infinite Pressure ranges 0..35 a 0..2000bar 0..500 a 0..30000psi Maximum applicable pressure 2 x FS 1,5 x FS oltre i 1000bar/15000psi Principle of measurement Strain gauge Power supply 12...30Vdc Maximum input 30mA Isolation resistance (at 50 Vdc) >1000 MOhm Signal at rated pressure (FS) 20mA Zero balancing 4mA Calibration: Rated pressure Room pressure 5% FS min. 10bar (150psi) Maximum load see diagram (page 3) Response time (10 at 90% FS) ~ 4ms Output noise (RMS 10-400Hz) < 0,05% FS Calibration signal 80% FS Protection against overvoltages and power supply polarity reverse SI Temperature range of Strain Gauge Housing -20...+70°C -4...+158°F Thermal drift in compensated range: Zero/Calibrat/Sensitivity < 0,02% FS/°C < 0,01% FS/°F Maximum temperature of diaphragm 400°C / 750°F Influence due to fluid temperature change (zero) 0,02 bar/°C 15 psi/100°F Standard material in contact with process medium Diaphragm: • 15-5 PH with GTP+ coating • 17-7 PH corrugated diaphragm with GTP+ coating for ranges <100 bar (1500psi) Stem: • 17-4 PH Thermocouple (model MX2) STD: type “J” (isolated junction) Protection level (with 6-pin female connector installed) IP65 Electrical connections 6-pin conn. VPT07RA10-6PT  (PT02A-10-6P) 8-pin conn. PC02E-12-8P