Gefran ILM-B05C - Melt High Temperature

Accuracy (1) H <±0.25% FS (100...2000 bar)
 M <±0.5% FS (17...2000 bar)
Measurement range 0..17 to 0..2000bar
0..250 to 0..30000psi
Maximum overpressure
(without degrading performances)
2 x FS
1.5 x FS above 700bar/10000psi
Measurement principle Extensimetric (Thick film)
Power supply 18-30 Vdc
Maximum current absorption (*) 1 W
(1.2 W with relay optional)
Zero offset <±0.25% FS
Zero adjustment “Autozero” function
Communication interface IO-Link
Cycle time 2 msec
IO-Link version 1.1
Transmission type COM2 (38.4 kBaud)
Profile Smart sensor generic profile
SIO Mode Yes
Required class for Master port A
Pressure process data resolution 14 bit
Analog output resolution 16 bit
Temperature process data resolution 16 bit
Rangeability 3:1 (analogue output opt.)
Calibration signal 80% FS
Power supply polarity reverse protection YES
Compensed temperature range housing 0...+85°C
Operating temperature range housing -30...+85°C
Storage temperature range housing -40...+125°C
Thermal drift in compesated range:
Zero / Calibration / Sensibility < 0.02% FS/°C
Diaphragm maximum temperature 400°C / 750°F
Zero drift due to change in process
temperature (zero)
< 2 bar/100°C /
< 15 psi/100°F
Integral temperature (optional) Accuracy T/C type J
Protection degree
(5-pole female connector)
IP65
with suitable mating connector