Gefran HME-B01C - Melt High Temperature

Accuracy (1) H <±0.25%FS (100...2000 bar)
M <±0.5%FS (17...2000 bar)
Resolution 16 bit
Measurement range 0..17 to 0..2000bar
0..250 to 0..30000psi
Rangeability 3:1
Maximum overpressure (without
degrading performances)
2 x FS
1.5 x FS above 1000bar/15000psi
Measurement principle Extensimetric thick film
Power supply 13...30Vdc
Maximum current absorption 23mA
(40mA with relay optional)
Output signal Full Scale (FS) 20mA
Zero balance (tollerance ± 0.25% FS) 4mA
Calibration signal 80% FS
Power supply polarity reverse
protection YES
Compensated temperature range
housing 0...+85°C
Operating temperature range
housing -30...+85°C
Storage temperature range housing -40...+125°C
Thermal drift in compensated range:
Zero / Calibration / Sensibility < 0.02% FS/°C
Diaphragm maximum temperature 400°C / 750°F
Zero drift due to change in process
temperature (zero) < 0.02 bar/°C
Standard material in contact with
process medium
Diaphragm:
• 15-5 PH with GTP+ coating
• 17-7 PH corrugated diaphragm with
GTP+ coating for ranges <100bar
(1500psi)
Stem: • 17-4 PH
Thermocouple (model HME2) STD: type “J” (isolated junction)
Protection degree
(with 6-pole female connector
CON300)
IP66
SIL2 certification
According to Standards
IEC/EN 61508:2010
IEC/EN 62061:2005