Gefran TPH-P30M - Industrial

Accuracy (1)
Resolution
Overpressure (without degrading)
Burst pressure
Pressure media
Body materials
Measurement principle
Power supply
Common mode voltage
Output impedance
Load impedance
Insulation resistance
Zero and span setting
Output voltage (sensitivity)
Calibration signal
Long-term stability
Operating temperature range (process) (3)
Compensated temperature range (2)
Storage temperature range
Temperature effects over compensated range (zero-span)
Mounting position effects
Humidity
Weight
Mechanical shock
Vibrations
Ingress protection
± 0.1% FSO typical; ± 0.2% FSO max
Infinite
2 x FS (max 6000 bar)
3 x FS (max 7500 bar)
Inox 15-5PH (1.4545) / 17-4PH (1.4542)
Inox AISI 304 (1.4301)
Bonded Strain gauge on steel (4 active elements)
10 (max 15) Vdc/ac RMS
Typical 5V @ 10V supply
350 Ω (±1)
> 1000 KΩ
> 1000 MΩ @ 50Volt
±0.5%FSO
1 mV/V nominal
80% FSO nominal (see diagram)
< 0.2% FSO/Year (at rated condition)
-30...+120°C (-22...+248°F)
-10...+85°C (14...+185°F)
-30...+105°C (-22...+221°F)
±0.01% FSO/°C typical (±0.020% FSO/°C max.)
Negligible
Up to 100%RH non condensing
330 gr. nominal
100g/11msec, according to IEC 60068-2-27
20g max a 10...2000Hz, according to IEC 60068-2-6
IP65/IP66/IP67