Gefran Industrial

KX-B02D

Gefran

Marka Gefran
Ürün Industrial
Ürün Kodu KX-B02D
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


Output signal Current 4-20 mA (2 wire system) Accuracy (1) ± 0.15% FS typical; ± 0.2% FS max Non Linearity <± 0.1% FS BFSL Hysteresis <± 0.1% FS Repeatability <± 0.05% FS Pressure ranges from ±1 bar to 1000 bar (see table) Resolution Infinite Overpressure (without degrading performance) See table Pressure containment (Burst test) See table Pressure media Fluid compatible with 17-4PH and AISI 430F Stainless Steel Housing Stainless Steel INOX AISI 304 Power supply 10...30Vdc Dielectric strength In conformity to 500 Vac @ 60 sec. test Zero output signal 4mA (nominal) Full scale output signal 20mA (nominal) Max allowed load See load diagram Long term stability < 0.1% FS/year Operating temperature range (process) -40...+125°C (-40...+257°F) For Atex application see table on page 3 Operating temperature range (ambient) -40...+105°C (-40...+221°F) For Atex application see table on page 3 Compensated temperature range -20...+85°C (-4...+185°F) Storage temperature range -40...+125°C (-40...+257°F) Temperature effects over compensated range (zero) ± 0.01% FS/°C Temperature effects over compensated range (span) ± 0.01% FS/°C Response time (10...90%FS) < 1 msec. Zero offset tolerance ± 0.15% FS typ; ± 0.25% FS max Span offset tolerance ± 0.15% FS typ; ± 0.25% FS max Mounting position effects Negligible Humidity Up to 100%RH non-condensing Weight 110 gr. nominal Mechanical shock 100 g / 11 msec. according to IEC 60068-2-27 Vibrations 20 g max at 10-2000Hz according to IEC60068-2-6 Output short circuit and reverse polarity protection YES 1 Includes combined effects of Non Linearity BFSL (Best Fit Straight Line), Hysteresis and Repeatability (acc. to IEC 62828-2) 

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.