Gefran KS-I-B04U - Industrial

Output signal IO-Link
Non Linearity (BFSL) ± 0.15% FS (typ)
± 0.25% FS (max)
Hysteresis + 0.1% FS (typ)
+ 0.15% FS (max)
Repeatability ± 0.025% FS (typ)
± 0.05% FS (max)
Zero offset tolerance ± 0.15% FS (typ)
± 0.25% FS (max)
Span offset tolarance ± 0.15% FS (typ)
± 0.25% FS (max)
Accuracy at room temperature < ± 0.5% FS
Pressure ranges From 4 bar to 1000 bar
(See table)
Overpressure (without
degrading performance)
See table
Pressure containment
(burst test)
See table
Pressure Media Fluids compatible with Stainless
Steel AISI 430F and 17-4 PH
Housing Stainless Steel AISI 304
Power supply 18-30Vdc
Maximum current absorption 1 W
Zero adjustment “Autozero” function
Communication interface IO-Link
Cycle time 1 msec
IO-Link version 1.1
Transmission type COM3 (230.4 kBaud)
Profile Smart sensor generic profile
SIO Mode Yes
Required class for Master port A
Pressure data resolution 14 bit
Temperature data resolution 12 bit
Power supply polarity reverse
protection YES
Integral temperature Sensor on electronic board
Operating temperature range
(process)
-40...+125°C (-40...+257°F)
Operating temperature range
(ambient)
-40...+105°C (-40...+221°F)
Compensated temperature
range
-20...+85°C (-4...+185°F)
Storage temperature range -40...+125°C (-40...+257°F)
Temperature effects over
compensated range (zero)
± 0.01% FS/°C typ.
(± 0.02% FS/°C max.)
Temperature effects over
compensated range (span)
± 0.01% FS/°C typ.
(± 0.02% FS/°C max.)
Warm-up time < 30 sec.
Mounting position effects Negligible
Humidity Until 100%RH
non-condensing
Weight 80-120 gr. nominal
Mechanical shock 100g/11msec according to
IEC 60068-2-27
Vibrations 20g max at 10...2000 Hz
according to IEC 60068-2-6
Ingress protection IP65/IP67 (M12 version) with
female homologated connector
mounted, tightening
torque 0.6Nm + low strenght
threadlocker
Output short circuit and reverse
polarity protection
YES
EC Conformity According to Directive 2014/30/
EU