Gefran Industrial

KS-I-B01C

Gefran

Marka Gefran
Ürün Industrial
Ürün Kodu KS-I-B01C
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


Output signal IO-Link Non Linearity (BFSL) ± 0.15% FS (typ) ± 0.25% FS (max) Hysteresis + 0.1% FS (typ) + 0.15% FS (max) Repeatability ± 0.025% FS (typ) ± 0.05% FS (max) Zero offset tolerance ± 0.15% FS (typ) ± 0.25% FS (max) Span offset tolarance ± 0.15% FS (typ) ± 0.25% FS (max) Accuracy at room temperature < ± 0.5% FS Pressure ranges From 4 bar to 1000 bar (See table) Overpressure (without degrading performance) See table Pressure containment (burst test) See table Pressure Media Fluids compatible with Stainless Steel AISI 430F and 17-4 PH Housing Stainless Steel AISI 304 Power supply 18-30Vdc Maximum current absorption 1 W Zero adjustment “Autozero” function Communication interface IO-Link Cycle time 1 msec IO-Link version 1.1 Transmission type COM3 (230.4 kBaud) Profile Smart sensor generic profile SIO Mode Yes Required class for Master port A Pressure data resolution 14 bit Temperature data resolution 12 bit Power supply polarity reverse protection YES Integral temperature Sensor on electronic board Operating temperature range (process) -40...+125°C (-40...+257°F) Operating temperature range (ambient) -40...+105°C (-40...+221°F) Compensated temperature range -20...+85°C (-4...+185°F) Storage temperature range -40...+125°C (-40...+257°F) Temperature effects over compensated range (zero) ± 0.01% FS/°C typ. (± 0.02% FS/°C max.) Temperature effects over compensated range (span) ± 0.01% FS/°C typ. (± 0.02% FS/°C max.) Warm-up time < 30 sec. Mounting position effects Negligible Humidity Until 100%RH non-condensing Weight 80-120 gr. nominal Mechanical shock 100g/11msec according to IEC 60068-2-27 Vibrations 20g max at 10...2000 Hz according to IEC 60068-2-6 Ingress protection IP65/IP67 (M12 version) with female homologated connector mounted, tightening torque 0.6Nm + low strenght threadlocker Output short circuit and reverse polarity protection YES EC Conformity According to Directive 2014/30/ EU

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.