FIP Italy Fip Italy Dkulv Series Dn 15?65 Dialock? 2 Way Diaphragm Valve

DKULV Series DN 15÷65

FIP Italy

Marka FIP Italy
Ürün DIALOCK® 2-way Diaphragm Valve
Ürün Kodu DKULV Series DN 15÷65
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


DIALOCK® diaphragm valve with female union ends for solvent welding, BS series

DIALOCK® 2-WAY DIAPHRAGM VALVE

• Connection system for solvent weld, threaded and flanged joints

• Optimised fluid dynamic design: maximum output flow rate thanks to the

optimised efficiency of the fluid dynamics that characterise the new internal

geometry of the body

• Internal components in metal, totally isolated from the fluid and external

environment

• Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet

sizes for 7 different valve sizes

• Non-rising handwheel that stays at the same height during rotation,

equipped with a graduated optical indicator protected by a transparent

PVC cap with seal O-Ring

• Bonnet fastening screws in stainless steel protected against the external

environment by PE plugs. Absence of metal parts exposed to the external

environment to prevent any risk of corrosion.

• CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the

uniform distribution of shutter pressure on the diaphragm seal, offers the

following advantages:

? reduction in the tightening torque of the screws fixing the actuator to

the valve body

? reduced mechanical stress on all valve components (actuator, body and

diaphragm)

? easy to clean valve interior

? low risk of the accumulation of deposits, contamination or damage to

the diaphragm due to crystallisation

? operating torque reduction

EPDM code

FKM code

PTFE code

DKULV012E

DKULV012F

DKULV012P

DKULV034E

DKULV034F

DKULV034P

DKULV100E

DKULV100F

DKULV100P

DKULV114E

DKULV114F

DKULV114P

DKULV112E

DKULV112F

DKULV112P

DKULV200E

DKULV200F

DKULV200P

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.