Ebara AGA 076 M - Aga 076 M Self Priming Centrifugal Pumps

Technical dataFlow ratefrom 0.3 to 9.6 m³/hTotal headFrom 16.5 to 68 mMax. working pressure6 bar for AGA 0.60-0.75-1.0010 bar for the rest of the rangeMax. temperature of the liquid45°CMax. suction depth8 mPoles2Insulation classFProtection degreeIP44VoltageSingle-phase 1~230V ±10%Three-phase 3~230/400V ±10%MaterialsPump bodyCast ironImpellerPPE+PS with glass fibres for AGA 0.60-0.75-1.00,brass for the rest of the rangeShaftStainless steel AISI 303 (EN 1.4305) (part in contact with liquid)Mechanical sealCeramic/Carbon/NBR (standard)Motor supportAluminium for AGA 0.60-0.75-1.00,Cast iron for the rest of the range

Cast iron self-priming centrifugal pump equipped with Venturi unit (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to its low weight. The AGA-AGC self-priming pump installed on a flat, well secured surface allows for an installation of up to 8 metres. Suitable for residential applications: garden irrigation, vehicle washing and clean water handling in general. Lightweight and easily transportable, small in size. For further technical information see the Databook • Domestic pressurisation • Small-scale garden irrigation • Washing of vehicles • Handling of clean water in general