|United States (US)
|Yeni / Kullanılmamış
Gate Valve.Application The gate valve is designed to open or close the service fl uid fl ow fully. The gate valve is not used for fl ow-control or throttling purposes. It is used in primary, secondary and auxiliary circuits of the nuclear power plants outside hermetically sealed zones. Working medium water steam air gas other fl uids Maximum working temperature Tmax 250 °C Technical description The gate valves designed in cast version are with rising stem and fl exible wedge. The gate valve is made of cast semi-fi nished products. The body and the bonnet are connected mutually by fl anged joint–bolted design. The seat rings are welded into the body. The sealing surfaces of the seats and of the wedge are overlay by hard faced but without cobalt overlay alloy. The packing is made of graphite rings. The gate valves designed in fully welded version are fl at with rising stem and solid wedge. The body and the bonnet are fabricated and connected together by fl anged joint. Production range cast version - DN 50-800 MAWP up to 4,0 Mpa fully welded version - DN 400-1200 MAWP up to 1,0 Mpa
İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.Türkiye' nin Her Yerinden44448 19
Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.