Armatury Control Valve, Pn 63 400, Welded Ends

V40

Armatury

Marka Armatury
Ürün Control Valve, Pn 63 400, Welded Ends
Ürün Kodu V40
Artikel -
Ülke United States (US)
Durumu Yeni / Kullanılmamış

Teknik Bilgi


Control valve, PN 63-400, welded ends.Application Globe valves (V46) are industrial valves designed to open or close the service fluid flow fully. Control (V40) valves are used to regulate flowing fluid. Both types are used especially in power engineering, chemical industry as well as other industries putting great demands on functionality at high pressures and high temperatures. Working medium water steam gas other fluids seawater Technical description The valve has a one-piece body which can be a forged or a cast depending on nominal size and nominal pressure. The yoke-type bonnet is also cast or forged and is connected with the body by means of a bolted or flanged joint. The seat and the disc are hard faced. The disc is made as either a plug type disc (valves V46) or a regulating disc (valves V40). Valves with regulating disc have a linear regulating characteristic. Tightness is achieved by means of special graphite gaskets and packing rings. Tightness of the stem of valve type V46.6 is achieved by a bellow. The valves are designed so as to be earthquake resistant. Operation manual (hand wheel, chain wheel) electric actuator pneumatic actuator, hydraulic actuator actuator located out of the valve Globe valves can be equipped with a locking device. Position indicator on request. Operation is dimensioned for the working parameters acc. to EN 13709.

Orijinal Ürünler
Çoklu Lojistik Seçeneği
Dünyanın Her Yerine Tedarik
Uzman Ekip Kadrosuyla
Bize 7/24 E-Posta gönderebilir veya Canlı Destekten Sorularınızı Sorabilirsiniz.

İmtek Mühendislik Ltd .Şti. Yurtiçi ve Yurtdışında ihtiyaç duyulan teknolojik malzemeleri elektronik,hidrolik, pnömatik sistem yedek parçalarını en hızlı şekilde tedarik etmek amacıyla 2001 yılında Adana'da kurulmuştur.

info@fabrikaparca.com

Türkiye' nin Her Yerinden44448 19
İzmir
Bursa
İstanbul
Adana

ÇALIŞMA SAATLERİ

Pazartesi - Cuma

08:00 - 18:00

Hafta sonu kapalı.

Telif Hakkı © İmtek Mühendislik Ltd. Şti. Tüm hakkı saklıdır.